GAI-Tronics 12560-003 Power Supply Kit for Advance Card Rack - Manual

Pub. 42003-158
GAI-Tronics Corporation P.O. Box 1060, Reading, PA 19607-1060 USA
610-777-1374 „ 800-492-1212 „ Fax: 610-796-5954
V ISIT WWW . GAI - TRONICS . COM FOR PRODUCT LITERATURE AND MANUALS
G A I - T R O N I C S ® C O R P O R A T I O N
A H U B B E L L C O M P A N Y
Card Rack Assembly Power Supply
Replacement Kit
M
ODEL
12560-003
Confidentiality Notice
This manual is provided solely as an operational, installation, and maintenance guide and contains sensitive
business and technical information which is confidential and proprietary to GAI-Tronics. GAI-Tronics
retains all intellectual property and other rights in or to the information contained herein, and such
information may only be used in connection with the operation of your GAI-Tronics product or system.
This manual may not be disclosed in any form, in whole or in part, directly or indirectly, to any third party.
General Information
The Model 12560-003 Power Supply Replacement Kit is for use on the Model 10457-007 Card Rack
Assembly.
Installation
Removing the Old Power Supply
WARNING
Power to the card rack must be removed prior to beginning the following steps:
1. At the rear of the Model 10457-007 Card Rack Assembly, remove the four outside screws on the
panel.
2. Gently lift the power supply panel away from the rack.
CAUTION
There are cables connecting the power supply to the backplane that can become dislodged.
3. Remove the two dc connectors from the power supply. See Figure 1.
4. Remove the ac connector from the power supply. See Figure 1.
5. At the rear of the power supply panel, remove the four power supply mounting screws, and free the
power supply. Remove the ground wire.