GAI-Tronics 12546-001 SONIC ALARM Cabinet Mount Pole Kit - Manual (Page 2)

Pub. 42003-163
M ODEL 12546-001 SONIC ALARM™ C ABINET P OLE M OUNT B RACKET K IT Page: 2 of 3
\\s_eng\gtcproddocs\standard ioms - current release\42003 kit manuals\42003-163.doc
3/99
Installation
1. Attach the right and left angle brackets (Item 2) to the U-channel bracket (Item 1) using screws,
washers and nuts (Items 5–8) as shown in Figure 1.
2. Attach the angle support brackets (Item 3) to the U-channel bracket (Item 1) and the right and left
angle brackets (Item 2) using screws, washers and nuts (Items 5–8) as shown in Figure 1.
3. Attach the stabilizer plate (Item 4) to the angle support brackets (Item 3) using screws, washers and
nuts (Items 5-8) as shown in Figure 1.
N OTE : Depending on personnel and hoist equipment available, the order of remaining steps may vary.
4. Attach the bracket assembly from steps 1–3 to the pole (Item 10). See Figure 2.
5. Attach the cabinet assembly (Item 9) to the bracket assembly using screws, washers, nuts (Items 5–8)
as shown in Figure 3.
Figure 1.