GAI-Tronics 12537-001 Speaker Mounting Kit for Pole (Sonic) - Manual

Pub. 42003-164A
GAI-Tronics Corporation P.O. Box 1060, Reading, PA 19607-1060 USA
610-777-1374 „ 800-492-1212 „ Fax: 610-796-5954
V ISIT WWW . GAI - TRONICS . COM FOR PRODUCT LITERATURE AND MANUALS
G A I - T R O N I C S ® C O R P O R A T I O N
A H U B B E L L C O M P A N Y
SONIC ALARM™ Speaker
Pole Mounting Bracket Kit
M
ODEL
12537-001
Confidentiality Notice
This manual is provided solely as an operational, installation, and maintenance guide and contains sensitive
business and technical information that is confidential and proprietary to GAI-Tronics. GAI-Tronics
retains all intellectual property and other rights in or to the information contained herein, and such
information may only be used in connection with the operation of your GAI-Tronics product or system.
This manual may not be disclosed in any form, in whole or in part, directly or indirectly, to any third party.
General Information
This kit is intended for the mounting of one or two speaker horns with 120° coverage on a single pole. A
single horn can be mounted, or two horns can be stacked vertically and mounted as a unit to the pole. The
kit includes the following components:
Qty. Description Item No.
2 Mounting bracket 1
2 Speaker spacer bracket 2
2 Support bracket 3
12 Screw, hex head, 1/4-20 thread 4
24 Washer, flat, 1/4-inch 5
12 Lock washer, 1/4-inch 6
12 Nut, hex, 1/4-20 thread 7
Items 8-11 are not supplied in this kit; however, they are referred to in these instructions.
1 or 2 Model 13340 Horn with U-bracket and mounting hardware 8
1 or 2 Driver 9
1 Wood pole (see Figure 4 for specifications) 10
10 Lag screw recommended. Size .50
×2.0 inches long
11
N OTE : Mounting hardware is required based on the configuration of the horn stack. Use only hardware
that has a hot dipped galvanized finish. Lock washers and/or locking nuts are required.