GAI-Tronics 238 ADA Universal Mounting Bracket for Wireless Call-Box - Manual (Page 3)

Pub. 42003-187A
M ODEL 238 Pole-Mounting Bracket Kit Page: 3 of 3
\\s_eng\gtcproddocs\standard ioms - current release\42003 kit manuals\42003-187a.doc
12/00
Install the Sign Mounting Bracket
1. Mount the bracket by installing both supplied U-bolts around the exterior of the pole and through the
bracket. Place the bracket at the desired height. Refer to Figure 2 below.
Note that this bracket does not require drilling an access hole into the pole.
2. Install the four lock washers and nuts on the U-bolts and tighten the nuts to 20 foot-pounds using a
torque wrench.
3. Place the left side sign against the bracket and secure it using two ¼-20 bolts and two flat washers.
Place the right side sign against the bracket and secure it using two ¼-20 bolts and two flat washers.
Figure 2. Sign Mounting Bracket Assembly