GAI-Tronics 12512-011 Hookswitch Assembly Kit - Manual (Page 3)

Pub. 42003-191A
M ODEL 12512-011 H OOKSWITCH A SSEMBLY R EPLACEMENT K IT Page: 3 of 3
\\s_eng\gtcproddocs\standard ioms - current release\42003 kit manuals\42003-191a.doc
12/01
6. Remove the two screws securing the handset cradle to the front panel.
7. Slide the cradle, switch, and wiring harness assembly through the hole in the front panel.
8. Discard the cradle assembly and screws.
Installation of New Assembly
9. Feed the cradle assembly wires through the front panel and secure the cradle with the 2 screws
provided.
10. Reconnect the wire harness plug to J4 as noted in step 5. Bundle handset and reed wires with the
tie-wrap, as necessary.
11. Re-assemble each side cover to desk-edge housing using the screws from step 2.
12. Replace the desk-edge subset to desk mounting bracket using two screws from step 1.
13. Verify proper operation.