GAI-Tronics 12521-002 Microphone Assembly Replacement Kit for 293 & 294 Series Phones - Manual

Pub. 42003-224A
GAI-Tronics Corporation 400 E. Wyomissing Ave., Mohnton, PA 19540 USA
610-777-1374 „ 800-492-1212 „ Fax: 610-796-5954
V ISIT WWW . GAI - TRONICS . COM FOR PRODUCT LITERATURE AND MANUALS
G A I - T R O N I C S ® C O R P O R A T I O N
A H U B B E L L C O M P A N Y
Microphone Assembly Replacement Kit
for 293 & 294 Series Phones
Model 12521-002
Confidentiality Notice
This manual is provided solely as an operational, installation, and maintenance guide and contains
sensitive business and technical information that is confidential and proprietary to GAI-Tronics.
GAI-Tronics retains all intellectual property and other rights in or to the information contained herein,
and such information may only be used in connection with the operation of your GAI-Tronics product or
system. This manual may not be disclosed in any form, in whole or in part, directly or indirectly, to any
third party.
General Information
The Model 12521-002 Microphone Assembly Replacement Kit is used in all 293 and 294 Series Phones.
This kit includes the following components:
Qty Description
1 Microphone Assembly
1 Tie Wrap
Installation
Removing the Old Microphone Assembly
1. Use a Model 233-001 Tamper-Resistant Screwdriver to loosen and remove the four front panel
tamper-resistant screws. Note that field wiring will restrict complete removal of the front panel.
Record all field wiring terminations to unit and disconnect field wiring to allow front panel to be
placed on a working surface.
2. Carefully cut the tie wrap that secures the speaker, hookswitch, and microphone wires to the tie
anchor.
3. Unplug the microphone connector from J4 on the printed circuit board.
4. Remove the two mounting screws from the microphone assembly. See Figure 1.