GAI-Tronics 12587-103 ICS Subset to Page/Party Amplifier Conversion Cable Assembly - Manual

Pub. 42003-232B
GAI-Tronics Corporation 400 E. Wyomissing Ave. Mohnton, PA 19540 USA
610-777-1374 „ 800-492-1212 „ Fax: 610-796-5954
V ISIT WWW . GAI - TRONICS . COM FOR PRODUCT LITERATURE AND MANUALS
G A I - T R O N I C S ® C O R P O R A T I O N
A H U B B E L L C O M P A N Y
ICS Subset to Page/Party ® Amplifier
Conversion Cable Assembly
M
ODEL
12587-103
Confidentiality Notice
This manual is provided solely as an operational, installation, and maintenance guide and contains
sensitive business and technical information that is confidential and proprietary to GAI-Tronics. GAI-
Tronics retains all intellectual property and other rights in or to the information contained herein, and
such information may only be used in connection with the operation of your GAI-Tronics product or
system. This manual may not be disclosed in any form, in whole or in part, directly or indirectly, to any
third party.
General Information
The Model 12587-103 ICS Subset to Page/Party ® Amplifier Conversion Cable allows an ICS Page/Party ®
remote subset to be used with a standard Page/Party ® remote amplifier. This conversion cable also
allows the interface of ICS subset extension cables to Page/Party
®
remote amplifiers. The conversion
cable is compatible between 7245 Series remote enclosure amplifiers and all ICS Page/Party
®
remote
subsets.
The Model 12587-103 consists of an 8-foot, 24-conductor, PVC jacket cable with a DB25 connector on
one end and 24-position connector on the other end.
The Model 12587-103 must ONLY be used in non-hazardous areas.
Installation
1. Arrange the cable so that the 24-position male connector is located at the remote amplifier enclosure
or wall receptacle and the cable’s DB25 female connector is located at the ICS remote subset. Plug
the DB25 connector into the rear of the subset housing and secure the two screws.
Figure 1. Installation