GAI-Tronics 12520-013 Round Black Single-Pole Push-Button Assembly Replacement Kit for 200 and 300 Series Telephones - Manual

Pub. 42003-251A
GAI-Tronics Corporation 400 E. Wyomissing Ave. Mohnton, PA 19540 USA
610-777-1374  800-492-1212  Fax: 610-796-5954
V ISIT WWW . GAI - TRONICS . COM FOR PRODUCT LITERATURE AND MANUALS
G A I - T R O N I C S ® C O R P O R A T I O N
A H U B B E L L C O M P A N Y
Round, Black, Single-Pole Push-Button
Assembly Replacement Kit
for 200 and 300 Series Telephones
M
ODEL
12520-013
Confidentiality Notice
This manual is provided solely as an operational, installation, and maintenance guide and contains
sensitive business and technical information that is confidential and proprietary to GAI-Tronics. GAI-
Tronics retains all intellectual property and other rights in or to the information contained herein, and
such information may only be used in connection with the operation of your GAI-Tronics product or
system. This manual may not be disclosed in any form, in whole or in part, directly or indirectly, to any
third party.
General Information
The Model 12520-013 Kit is intended for use on GAI-Tronics 200 and 300 Series standard telephones
(-001 and -002). This kit can be used to replace the black push-button assembly used on the Model
294AL, 298, 392, 2394AL, 396, and 398 Telephones.
Kit Components
Qty. Description Required Tools
1 Push-button Switch Assembly
 #1 Phillips Screwdriver
1 Mounting Nut
 1/8-inch Straight Slot Screwdriver
1 Mounting Ring
 Model 233-001 Security Screwdriver
1 Tie Wrap
 Wire Cutters
Model 294AL and 394AL Series Telephones
Removing the Old Push-Button Assembly
1. Use a Model 233-001 Security Screwdriver to loosen the four front cover screws. Save the screws
for re-assembly.
2. Lift the front cover assembly away from the back box.
3. Disconnect the telephone line cord, and strobe wire, if applicable.