GAI-Tronics 12806-001 RigCom Hinge Kit - Manual

Pub. 42003-253A
GAI-Tronics Corporation 400 E. Wyomissing Ave. Mohnton, PA 19540 USA
610-777-1374  800-492-1212  Fax: 610-796-5954
V ISIT WWW . GAI - TRONICS . COM FOR PRODUCT LITERATURE AND MANUALS
G A I - T R O N I C S ® C O R P O R A T I O N
A H U B B E L L C O M P A N Y
RigCom Hinge Kit
Model 12806-001
Confidentiality Notice
This manual is provided solely as an operational, installation, and maintenance guide and contains
sensitive business and technical information that is confidential and proprietary to GAI-Tronics.
GAI-Tronics retains all intellectual property and other rights in or to the information contained herein,
and such information may only be used in connection with the operation of your GAI-Tronics product or
system. This manual may not be disclosed in any form, in whole or in part, directly or indirectly, to any
third party.
General Information
The Model 12806-001 RigCom Hinge Kit is designed for use with GAI-Tronics Model 400-001, Model
400-002NS and Model 400-003 RigCom Stations.
The Model 12806-001 RigCom Hinge Kit includes the following components:
Qty Description
1 Set of Hinges
8 ¼-20
 1 ¼-inches hex head bolts
Installation
1. Attach the bottom hinge with pin to the rear enclosure with two ¼-20 bolts (note orientation).
2. Attach the top hinge to the front cover with two ¼-20 bolts by sliding it over the pin in the bottom
hinge. Refer to Figure 1.