GAI-Tronics 12515-007, 12515-008, 12515-009 Pressbar Handset with Hytrel Cord Replacement Kit - Manual

Pub. 42003-255A
GAI-Tronics Corporation 400 E. Wyomissing Ave. Mohnton, PA 19540 USA
610-777-1374  800-492-1212  Fax: 610-796-5954
V ISIT WWW . GAI - TRONICS . COM FOR PRODUCT LITERATURE AND MANUALS
G A I - T R O N I C S ® C O R P O R A T I O N
A H U B B E L L C O M P A N Y
Pressbar Handset with Hytrel ® Cord
Replacement Kits
Models 12515-007, 12515-008 & 12515-009
Confidentiality Notice
This manual is provided solely as an operational, installation, and maintenance guide and contains
sensitive business and technical information that is confidential and proprietary to GAI-Tronics.
GAI-Tronics retains all intellectual property and other rights in or to the information contained herein,
and such information may only be used in connection with the operation of your GAI-Tronics product or
system. This manual may not be disclosed in any form, in whole or in part, directly or indirectly, to any
third party.
General Information
The Model 12515-007 (6-foot), 12515-008 (15-foot), and 12515-009 (25-foot) Pressbar Handset with
Hytrel
® Cord Replacement Kits are intended to replace the armored cord pressbar handset on the
following GAI-Tronics telephones: Models 226-001, 227-001, 276-001 and 277-001.
This kit includes the following components:
Qty Description
1 Handset with Hytrel ® coil cord
1 Spring clip
2 #10-32
 3/8-inch screws
1 Cable tie
You will need the following tools to install the handset with armored cord:
 Phillips screwdriver
 Flathead screwdriver
 5/64-inch Allen screwdriver
 Torx Security Screwdriver, T-25 (GTC. No. 233-001)
 Needle-nose pliers