GAI-Tronics XCP0020A 16 Frequency Control Kit User Manual
Page 2
Advertising
Pub. 43003-013B
XCP0020A 16-Frequency Control Kit
Page: 2 of 2
4/02
3. To install a button, use needle-nose pliers to squeeze in at the top and bottom of the button. Slide the
button into the appropriate place on the key panel until it snaps into place.
4. Please refer to your ICP9000 Series Desktop Console Operator’s Manual, 43004-016, for further
information. The GAI-Tronics CARD Suite Software (XAC1000A) contains the necessary
information for configuration of this option in your ICP9000 Series Desktop Console. You must
“read console” after activation to be able to enter more than the standard 4 frequencies per channel.
Figure 1.
Advertising