GAI-Tronics XCP0080A Battery Revert Kit - Manual

Pub. 43003-019B
GAI-Tronics Corporation P.O. Box 1060, Reading, PA 19607-1060 USA
610-777-1374 n 800-492-1212 n Fax: 610-775-6540
V ISIT WWW . GAI - TRONICS . COM FOR PRODUCT LITERATURE AND MANUALS
G A I - T R O N I C S ® C O R P O R A T I O N
A H U B B E L L C O M P A N Y
Model XCP0080A Battery Revert Kit
Field Installation Kit Instructions
Confidentiality Notice
This manual is provided solely as an operational, installation, and maintenance guide and contains
sensitive business and technical information that is confidential and proprietary to GAI-Tronics.
GAI-Tronics retains all intellectual property and other rights in or to the information contained herein,
and such information may only be used in connection with the operation of your GAI-Tronics product or
system. This manual may not be disclosed in any form, in whole or in part, directly or indirectly, to any
third party.
General Information
The Model XCP0080A Battery Revert Kit for the ICP9000 Series Desktop Console or the ICP9000
Navigator Series MCU provides the ability to connect external back-up power. The kit provides the
following component:
Qty Description
1 Power Supply with auxiliary dc power connections
Note: The ICP9000 Series Desktop Console and the ICP9000 Navigator Series MCU, as shipped from
the factory, contains the necessary battery revert circuitry already present on the main PCBA.
Installation
1. Disconnect the power from the ICP9000 Series Desktop Console or ICP9000 Navigator Series MCU.
Then, disconnect existing power supply.
2. Connect the battery revert power supply by plugging in the DIN plug into the rear of the console or
MCU. Refer to the Figure 1.