GAI-Tronics XSA2000A Conversion Kit - ITA2000A to ITA2000S User Manual
Page 2
Advertising
Pub. 43003-027B
Model XSA2000A Conversion Kit – ITA2000A to ITA2000S
Page: 2 of 2
\\s_eng\gtcproddocs\radio products-draft\gtc 4300x\43003-027b\43003-027b.doc
09/04
3. Replace it with the EPROM provided in this kit taking care to observe the direction indicated on the
socket and the EPROM. Ensure the pins are seated and not bent. Make sure the connectors fit
properly into the cover.
4. Replace the cover and secure it with the four screws.
5. Carefully apply the label supplied with this kit onto the front of the tone adapter in the position shown
in Figure 1.
Figure 1.
Advertising