Grandstream GXP1610 User Guide User Manual
Page 16
GXP1610/GXP1620/GXP1625/GXP1628 User Guide Page 15 of 35
WALL MOUNT INSTALLATION
Figure 3: GXP16xx Wall Mount installation
1. Insert all 4 hooks into the slots.
2. Firmly slide the wall mount upward to lock it in place.
To set up the GXP1610/GXP1620/GXP1625/GXP1628, follow the steps below:
1.
Attach the phone stand or wall mount to the back of the phone where there are slots;
2.
Connect the handset and main phone case with the phone cord;
3.
Connect the LAN port of the phone to the RJ45 socket of a hub/switch or a router (LAN side of the
router) using the Ethernet cable;
4.
Connect the 5V DC output plug to the power jack on the phone; plug the power adapter into an electrical
outlet. If PoE switch is used in step 3, this step could be skipped;
5.
The LCD will display provisioning or firmware upgrade information. Before continuing, please wait for
the date/time display to show up;
6.
Using the keypad configuration menu or phone's embedded Web server (Web GUI) by entering the IP
address in Web browser, you can further configure the phone.