Harken 7320.10 ESP Jib Reefing & Furling - Manual (Page 15)

ESP Unit 0, 1 15
Assembly Foils/Connectors
8. Put red Loctite ® in foil screw holes and
secure with foil screws.
Tool: slotted screwdriver
7. Hold plastic bushing halves in cutouts
and over wire and insert up into foil.
7a. Make sure foil and connector
screw holes are facing up.
7b. Make sure connector and foil
are aligned.
7c. Hold plastic wedge in place with
thumb as you insert into foil. Align
foil holes with connector screw
holes.
a.
b.
c.