Harken 7320.10 ESP Jib Reefing & Furling - Manual (Page 22)

22 ESP Unit 0, 1
Assembly Final
26. Once on boat, loosen collar screws
enough to rotate opening in drum
assembly towards lead blocks. Put
blue Loctite ® on screws and tighten.
25. Slide feeder to third hole and secure
using foil screw and blue Loctite ® .
Tool: slotted screwdriver
Tools: Hex Driver
Unit Size
0, 1 5 mm
24. Locate nearest group of three screw
holes in adjuster tube, two for the
foil and one for the feeder. Put blue
Loctite ® in screw holes. Secure adjuster
tube with foil screws.
Tool: slotted screwdriver
Blue Loctite ®