Harken 7320.10 ESP Jib Reefing & Furling - Manual (Page 20)

20 ESP Unit 0, 1
Assembly Leg Kit with Toggle Assembly
20. Capture legs in one of the two collars.
Tip: If the legs do not fit collar, loosen
Locknuts at threaded crosspin.
19a. Make sure flat holes in leg line up with threaded crosspin flats.
19b. Secure using washers and locknuts.
If stay length is set, use side cutters
or needlenose pliers to bend cotter
pin to secure turnbuckle.
Line up flats
Unit Size
0, 1 10 mm
Tools: Socket or Open End Wrench
Collar