Harken 7320.10 ESP Jib Reefing & Furling - Manual (Page 16)

16 ESP Unit 0, 1
Assembly Foils/Connectors
10. Install connector bushings in top of
adjuster tube and insert into 2 m foil.
10a. Make sure foil and adjuster tube
screw holes are facing up.
10b. Make sure adjuster tube and foil
are aligned.
10c. Do not fasten with foil screws at
this time.
b.
a.
9. Join lower part of connector to next foil.
Put red Loctite ® on screw holes. Secure
with foil screws.
Adjuster Tube