Highgear CompassHi - Manual (Page 3)

C. BASIC OPERATION OF BUTTONS
S1: - VIEW NORMAL TIME OR DUAL TIME
- TOGGLE NORMAL TIME OR DUAL TIME (PRESS AND HOLD)
- VIEW TEMPERATURE IN
°F OR °C
- TOGGLE TEMPERATURE IN °F OR °C (PRESS AND HOLD)
- START/SPLIT CHRONOGRAPH
- TIMER START
- SELECT A1/A2 OR AL
- TOGGLE ALARM AND CHIME ON OR OFF (PRESS AND HOLD)
- ADJUST SETTING (SET)
S2: - ENTER COMPASS MODE
- SHOW DIRECTION
S3: - MODE CHANGE
- EXIT COMPASS MODE
- DIRECT CHANGE TO TIME MODE (PRESS AND HOLD)
- SELECT SETTING (SET)
S4: - EL BACK LIGHT
- START CALIBRATION (PRESS AND HOLD IN COMPASS MODE)
- SET (PRESS AND HOLD)
- STOP/RESET OF CHRONOGRAPH
- TIMER STOP
- RELOAD PRESET TIMER TIME
- EXIT (SET)
D. MODE CHANGE OPERATION
The mode change sequence is shown as follow:
At any mode, press and hold S3 for 3 seconds will change to time mode
directly.
E. HOW TO CALIBRATE AND USE COMPASS
- Calibrate the compass before use.
- At any mode, press S2 to enter Compass mode.
COMPASS
NORMAL TIME
TEMPERATURE
CHRONOGRAPH
TIMER
ALARM
S3
S3
S3
S3 S3
S1
DUAL TIME
Press and hold
3 seconds
Press and hold
3 seconds
S3
S2