Installing – Desa FB32C User Manual

Page 18

Advertising
background image

18

103296

Figure 20 - Attaching Firebox to Wall Studs

Nailing Flanges

Nails or Wood
Screws

INSTALLING

Continued

39 3/8"

27 7/8"

55 5/8"

35 1/2"

Figure 19 - Rough Opening for Installing in Corner

If installing in a corner, use dimensions shown in Figure 19 for the rough
opening. The height is 33" (FB32C) or 34 1/4" (FB32NC), which is the same
as the wall opening in Figure 18.

2. Install gas piping to firebox location. This installation includes an approved

flexible gas line (if allowed by local codes) after the manual shutoff valve. The
flexible gas line must be the last item installed on the gas piping. See Connect-
ing to Gas Supply
in log set owner’s manual.

3. Carefully set firebox in front of rough opening with back of firebox inside wall

opening.

IMPORTANT:

If installing Brass Trim Kit GA6090, see instructions

included with brass trim accessory. You must install shoulder screws now.

4. If using GA3500A blower accessory (Model FB32C only), see Installing

Blower Accessory for built-in installation, page 12.

5. Attach flexible gas line to log set. See Connecting to Gas Supply in log set

owner’s manual.

6. Carefully insert firebox into rough opening.
7. Attach firebox to wall studs using nails or wood screws through holes in

nailing flange (see Figure 20).

8. Check all gas connections for leaks. See Checking Gas Connections in log set

owner’s manual.

9. If using optional GA6090 brass trim kit, install the trim after final finishing

and/or painting of wall. See instructions included with brass trim accessory for
attaching brass trim.

Advertising