HONDA 2010 CR-V - Manual (Page 268)

−−
When the system does not accept
the selected compass zone, you see
‘‘
’’ in the direction display. Select
appropriate zone number again.
Select the zone indicator by
turning the select/reset knob. The
display begins to blink. Push the
same knob to enter this setting.
Find the zone for your area on the
zone map (see page
). Each
zone number (1 through 15)
corresponds to a compass zone.
Turn the select/reset knob to
select the appropriate zone
number, and press the select/
reset knob to enter the number.
2.
3.
4.
263
Compass
262
ZONE INDICATOR
09/07/16 18:29:43 31SWA630_267