Installing a child seat – HONDA 2010 CR-V User Manual

Page 55

Advertising
background image

A child seat with a tether can be
installed in any seating position in
the back seat.

Each rear outside seating position
has an anchorage point on the seat-
back, and the center seating position
has an anchorage point in the ceiling
near the tailgate.

Since a tether can provide additional
security to the lap/shoulder belt
installation, we recommend using a
tether whenever one is required or
available.

Attach the tether strap hook to the
anchor, making sure the tether
strap is not twisted.

Tighten the strap according to the
seat maker’s instructions.

Reinstall the dual deck cargo shelf.

On vehicles with the dual deck
cargo shelf, remove it (see page

).

After properly securing the child
seat with the lap/shoulder belt
(see page

), route the tether

strap over the top of the seat-back
and through the legs of the head
restraint.

1.

3.

2.

4.

5.

117

47

CONTINUED

Installing a Child Seat with a
Tether

Using an Outer Anchor

Installing a Child Seat

Dr
iv

er
and

P

asseng

er
Saf

e

ty

49

TETHER STRAP HOOK

ANCHOR

ANCHOR

09/07/29 20:30:42 31SWA630_054

Advertising