X-y command thc – Hypertherm THC X-Y Table Product Configuration User Manual
Page 15
Advertising
![background image](/files/789578/content/doc015.png)
1-12
SPECIFICATIONS & UNIT MOUNTING
X-Y Command THC
Product Configuration Manual
THC.50
Shield
Hex screws (4)
Screws (4)
Spacer
Block
Hex screws (2)
Torch Mounting Block Kit
A torch mounting block kit is required to mount the torch to the lifter or to the optional breakaway.
Each kit includes all hardware required to mount the torch to the X-Y lifter as shown in Figure 1-11. The
kit can also be used to mount the torch to the optional breakaway as shown in Figure 1-12.
There are 3 kits available depending on the diameter of your torch. Use the order form to determine
which kit you need.
•
See Figure 1-5 for torch-to-lifter mounting dimensions.
Figure 1-11 X-Y Lifter Assembly Torch Mounting Block Mounting Details
Advertising