Hypertherm THC X-Y Table Product Configuration - Manual (Page 8)

1-5 X-Y Command THC Product Configuration Manual
SPECIFICATIONS & UNIT MOUNTING
Plasma Interface Assembly
Electrical
Input Power (from THC Control Module)............+ 24 VDC
Parallel Digital I/O ..............................................+ 12 VDC
Serial Digital I/O (RS-422)..................................+ 5 VDC
Voltage Divider Function ..................................41 :1 Arc Voltage (isolated)
Weight and Dimensions....................................Figure 1-3
Figure 1-3 Plasma Interface Assembly Weight and Dimensions
THC
.90
3.1"
(78 mm)
2.2"
(56 mm)
10.7"
(271 mm)
6.6"
(168 mm)
4.6 lb
(2 kg)
HT4400 INSTALLATION
NOTE: Instructions to remove the plasma interface PCB from the interface enclosure
and install it into the HT4400 power supply are included in the CommandTHC
instruction manual 802780.
The plasma interface enclosure is not used for the HT4400 installation.