Disc Makers KDC-W7027 - Manual (Page 15)

English | 15
Text Display Switching
Switching the text display.
1 Select the key function section
Press the [NEXT] button.
Repeatedly press the button until "DISP" is
displayed above the [3] button.
Refer to 'Notes on Multi-function Key System'
(page 9).
2 Enter display control mode
Press the [3] ("DISP") button.
3 Select the text
Press the [3] ("TEXT") button.
• It can also be switched by pressing either [ 4] or
[ ¢] button.
In Tuner source
Information Display
Program Service name or Frequency "BAND+PS"
Radio text ,
Program Service name or Frequency "R-TEXT"
Clock "Clock"
Displaying the frequency during Program
Service name reception
Press the [SCRL] button for at least 1 second.
The frequency for the RDS station will be
displayed for 5 seconds instead of the Program
Service name.
In CD & External disc source
Information Display
Disc title "D-TITLE"
Track title "T-TITLE"
Track number & Play time "P-Time"
Disc name "DNPS"
Clock "Clock"
In MP3/WMA source
Information Display
Song title & Artist name "TITLE"
Album name & Artist name "ALBUM"
Folder name "FOLDER NAME"
File name "FILE NAME"
Play time & File number "P-Time"
Clock "Clock"
In Auxiliary input source
Information Display
Auxiliary input name "AUX Name"
Clock "Clock"
In Standby
Information Display
"STANDBY"
Clock "Clock"
4 Exit Display Control mode
Press the [6] button.
• If the Disc title, Track title, Song title & Artist name, or
Album name & Artist name is selected when the disc
which does not have Disc title, Track title, Song title,
Album name, or Artist name is played, track number
and play time are displayed.
Subwoofer Output
Turning the Subwoofer output ON or OFF.
Press the [SW] button for at least 1 second.
Each time the button is pressed Subwoofer
output switches ON or OFF.
When it’s ON, "Sub-W ON" is displayed.
• You can control this function when 'Switching preout'
(page 34) is set to "SWPRE Sub-W".