Disc Makers KDC-W7027 - Manual (Page 37)

English | 37
Built-in Auxiliary input Setting
Set the Built-in Auxiliary Input function.
Display Setting
"AUX OFF" When selecting the source there’s no Auxiliary Input.
"AUX ON" When selecting the source there’s Auxiliary Input.
• This setting is done after setting 'Security Code' (page
32).
Function of the KDC-W7027
In Standby mode
CD Read Setting
When there is a problem on playing a CD with
special format, this setting play the CD by force.
Display Setting
"CD READ 1" Play CD and MP3/WMA.
"CD READ 2" Play CD by force.
• Setting "CD READ 2" cannot play MP3/WMA.
Some music CDs may not be played back even in the
"CD READ 2" mode.
When LX AMP unit connecting
AMP Control
You can control the LX AMP connected to the
unit.
1 Select AMP Control mode
Press the [FM] or [AM] button.
Select the "AMP Control" display.
2 Enter AMP Control mode
Press the [ 4] or [¢] button for at least 1
second.
3 Select the AMP Control item for adjustment
Press the [FM] or [AM] button.
• For the details of the AMP Control item, see the
Instruction manual attached to the LX AMP.
4 Adjust the AMP Control item
Press the [ 4] or [¢] button.
5 Exit AMP Control mode
Press the [MENU] button.
• You cannot use the LX AMP operation during standby
mode.
Rotary volume operation select
Various items can be set using the rotary volume
knob.
Display Setting
"Rotary ON" The rotary volume knob can be used for item
setup.
"Rotary OFF" The rotary volume knob cannot be used for
item setup.
• To use the rotary volume knob for item setup, select
"Rotary ON" and press the [1] button in each setup
mode.