Disc Makers KDC-W7027 - Manual (Page 29)

English | 29
Phone Book Search Mode item Display
Initial Select Mode "Initial"
Redial Mode "Redial"
4 Select the initial of a person to dial (In Initial
Select Mode)
Press the [FM] or [AM] button.
• Initials including no corresponding name will not be
displayed.
5 Switch the Name
Press the [ 4] or [¢] button.
Switching between the Name and Telephone
Number
Press the [TI] button.
• Not available if the name has not been stored.
Scrolling the Name and Telephone Number
Press the [SCRL] button.
6 Dial a selected number
Press the [4] ("CALL") button.
7 Hang up
Press the [2] ("HANG") button.
Canceling the Hands Free mode
Press the [6] button.
Function of remote
Direct Dial
Inputting the telephone number with number
buttons on the remote, and dialing.
1 Select the key function section
Press the [NEXT] button.
Repeatedly press the button until "H-F" is
displayed above the [2] button.
Refer to 'Notes on Multi-function Key System'
(page 9).
2 Enter Hands Free mode
Press the [2] ("H-F") button.
3 Select the Dial Mode
Press the [3] ("DIAL") button.
"Dial" is displayed.
4 Enter the telephone number
Press the number [#], [*] and [+](ANG)
buttons on the remote.
• You can input max 32 digits.
• If an incorrect digit is entered, pressing the [
4]
button will clear it.
5 Dial an input number
Press the [4] ("CALL") button.
6 Hang up
Press the [2] ("HANG") button.
Canceling the Hands Free mode
Press the [6] button.