Disc Makers KDC-W7027 - Manual (Page 39)

English | 39
Connecting Wires to Terminals
1
2
3
4
5
6
7
8
1
2
3
4
5
6
7
8
TEL MUTE
P.CONT
ANT.CONT
EXT.CONT
FRONT
AUX IN
REAR SUB
WOOFER
Front left output (White)
Front right output (Red)
Rear right output (Red)/
Subwoofer right output (Red)
Rear left output (White)/
Subwoofer left output (White)
Battery wire (Yellow)
Ignition wire (Red)
FM/AM
antenna input
Antenna Cord (ISO)
Antenna Conversion Adaptor (ISO–JASO) (Accessory 3)
Wiring harness
(Accessory
1)
Connect to the terminal that
is grounded when either the
telephone rings or during
conversation.
Power control/ Motor antenna
control wire (Blue/White)
Connect either to the power control
terminal when using the optional
power amplifier, or to the antenna
control terminal in the vehicle.
A –7 Pin (Red)
A–4 Pin (Yellow)
Connector B
Fuse(10A)
Connector A
TEL mute wire (Brown)
To connect the KENWOOD
navigation system, consult
your navigation manual.
External amplifier control wire
(Pink / Black)
To "EXT.AMP.CONT." terminal of the
amplifier having the external amp
control function.
To KENWOOD disc changer/
GSM hands free unit/
External optional accessory
To connect these leads, refer to the
relevant instruction manuals.
If no connections are made, do
not let the cable come out from
the tab.
To External Display/
Steering remote
See next page
AUX left input (White)
AUX right input (Red)