Hypertherm MAXPRO200 Preventive Maintenance Program - Manual (Page 7)

MAXPRO200 Preventive Maintenance Program Instruction Manual 808800 3
Preventive maintenance overview
Congratulations on the purchase of your Hypertherm MAXPRO200 plasma system.
Hypertherm designs its plasma systems to withstand the demands of rugged industrial environments for many years of
service. To maintain optimal system performance, minimize overall operating costs, and prolong system life, regular
preventive maintenance practices must be followed. When properly maintained, your Hypertherm plasma system will
serve you for many years and provide consistent operational performance. Hypertherm has developed this Preventive
Maintenance Program (PMP) specifically for your MAXPRO200 plasma system.
If you have questions about how to maintain your Hypertherm plasma system, contact your regional Hypertherm Technical
Service team. Contact information for each regional office is available at:
http://www.hypertherm.com/en/About_us/Contact_us/index.jsp
The PMP has two parts: a cleaning and inspection plan and a component replacement plan.
Cleaning and inspection plan
This plan consists of a daily, weekly, and monthly schedule of cleaning and inspection tasks. Detailed instructions in
support of each task are included in the PMP to help guide your production and maintenance personnel in understanding
what to do and what to look for during each prescribed task.
Table 1on page 4 outlines the cleaning and inspection schedule. A monthly log sheet, found on the back cover of this
manual, allows you to make photocopies so your production staff can record the tasks they have performed and can
anticipate the tasks they must perform before the end of the month.