Hypertherm RT60 Retrofit Torch - Manual (Page 29)

OPERATION
4-2 RT60 / RT60M Operator Manual
0
WARNING
INSTANT-ON TORCHES
PLASMA ARC CAN CAUSE INJURY AND BURNS
Plasma arc comes on immediately when the torch switch is activated.
The plasma arc will quickly burn through gloves and skin. Make sure
power is OFF before changing consumables.
Installing Torch Consumables
ቢ
ባ Lightly hand tighten.
Retaining Cap
Nozzle
Electrode
Swirl Ring
Shield
Note: Cap-on sensor disables the torch
when the consumables are removed.