IBASE MI941 - Manual (Page 40)

BIOS SETUP
36 MI941 User’s Manual
Advanced Chipset Settings
This setting configures the north bridge, south bridge and the ME
subsystem. WARNING! Setting the wrong values may cause the system
to malfunction. -
BIOS SETUP UTILITY
Main Advanced PCIPnP Boot Security Chipset Exit
Advanced Chipset Settings
Configure North Bridge
features.
<- Select Screen
↑↓ Select Item
+- Change Field
Tab Select Field
F1 General Help
F10 Save and Exit
ESC Exit
WARNING: Setting wrong values in below sections
may cause system to malfunction.
► North Bridge Configuration
► South Bridge Configuration
BIOS SETUP UTILITY
Main Advanced PCIPnP Boot Security
Chipset
Exit
North Bridge Chipset Configuration
ENABLE: Allow
Remapping of
Overlapped PCI memory
above the total physical
memory.
DISABLE: Do not allow
remapping of memory
<- Select Screen
↑↓ Select Item
+- Change Field
Tab Select Field
F1 General Help
F10 Save and Exit
ESC Exit
Memory Remap Feature [Enabled]
PCI MMIO Allocation: 4GB To 3072MB
DRAM
Frequency [Auto]
Configure DRAM Timing by SPD [Enabled]
Memory
Hole [Disabled]
Initiate Graphics Adapter
[PEG/PCI]
IGD Graphics Mode Select [Enabled, 32MB]
IGD GTT Graphics memory size [No VT mode, 2MB]
PAVP
Mode [Lite]
PEG Port Configuration
PEG Port [Auto]
Memory Remap Feature
This feature allows remapping of overlapped PCI memory above the
total physical memory.
DRAM Frequency
This option is, by default, set to Auto.