IBASE MB838 - Manual (Page 34)

BIOS SETUP
MB838 User’s Manual
34
Ethernet Bypass Configuration
Aptio Setup Utility
Main
Advanced
IntelRCSetup Security Boot Save & Exit
Ethernet Bypass Configuration
Ethernet Bypass Quick Setting [Normal]
All LAN ports in NORMAL. WDT monitor system hang & SW
initiates a reboot
Bypass Quick Setting
Set LAN Bypass to Normal, Bypass, Firewall or Custom Define Mode
Normal mode: All LAN ports in NORMAL. When Watchdog monitor system
hangs, software will initiates a system reboot.
Bypass mode: All LAN ports in BYPASS during power-off or watchdog initiates
Bypass. System will not reboot.
Firewall mode: All LAN ports in BYPASS until software change it to NORMAL
under OS. When watchdog monitors system hang, software will
initiates a system reboot.
Manual mode: Customer defines watchdog reset, watchdog Bypass and
power-off Bypass settings.
Aptio Setup Utility
Main Advanced IntelRCSetup Security Boot Save & Exit
LAN Bypass Configuration
Ethernet Bypass Quick Setting [Manual]
Watchdog Reset Signal
Watchdog Bypass Setting
LAN1-2 Watchdog Bypass
Ext LAN1 LAN2 Bypass
Ext LAN3 LAN4 Bypass
[Disabled]
[Enable]
[Enable]
[Enable]
[Enable]
System OFF Bypass Setting
LAN1-2 Watchdog Bypass
Ext LAN1 LAN2 Bypass
Ext LAN3 LAN4 Bypass
[Enable]
[Enable]
[Enable]
Note: “Ext LAN Bypass” items only appear when extended IBASE LAN
module card installed.