IBASE MB838 - Manual (Page 39)

BIOS SETUP
39
Processor Configuration
Main Advanced IntelRCSetup Security Boot Save & Exit
Processor Configuration
----------------------------------------------
→ ←
Select Screen
↑↓ Select Item
Enter: Select
+- Change Field
F1: General Help
F2: Previous Values
F3: Optimized Default
F4: Save ESC: Exit
-------------------------------------------------------------------------------
Processor ID 000406D8
Processor Frequency 2.400 GHz
Microcode Revision 00000121
L1 Cache RAM 224KB
L2 Cache RAM 2048KB
Processor Version
EIST (GV3)
Geniune Intel(R) CPU
[Auto]
Enhanced Halt State (C1E) [Disable]
ACPI C2 [C6 NS]
Monitor/Mwait [Enable]
Fast String
Max CPUID Value Limit
Execute Disable Bit
VMX
[Enable]
[Disable]
[Enable]
[Enable]
Extended APIC [Enable]
AES-NI [Enable]
Turbo
RAPL
Active Processor Core
CPU Flex Ratio Overri
CPU Core Ratio
[Enable]
[Enable]
[All]
[Disable]
24
EIST (GV3)
Enable/Disable EIST. GV3 and TM1 must be enabled for TM2 to be
available. GV3 must be enabled for Turbo. Auto
– Enable for B0 CPU
stepping, all others disabled, change setting to override.
Fast String
When enabled, enable fast string for REP MOVS/STOS.
MAX CPUID Value Limit
This should be enabled in order to boot legacy OSes that cannot support
CPUs with extended CPUID functions.
Execute Disable Bit
When disabled, force the XD feature flag to always return 0.
VMX
Enables the Vanderpool Technology, takes effect after reboot.
Extended APIC
Enable/Disable extended APIC support.