IBASE IB889 - Manual (Page 34)

BIOS SETUP
30 IB889 User’s Manual
Advanced Chipset Settings
This setting configures the north bridge, south bridge and the ME
subsystem. WARNING! Setting the wrong values may cause the system
to malfunction.
BIOS SETUP UTILITY
Main Advanced PCIPnP Boot Security Chipset Exit
Advanced Chipset Settings
Options for NB
<- Select
Screen
↑↓ Select Item
Enter Go to Sub Screen
F1 General Help
F10 Save and Exit
ESC Exit
WARNING: Setting wrong values in below sections
may cause system to malfunction.
► North Bridge Configuration
► North Bridge2 Configuration
► South Bridge Configuration
BIOS SETUP UTILITY
Chipset
North Bridge Chipset Configuration
Memory Configuration
DRAM Timing Configuration
Size of Dimm #0: 1 GB Timing Configuration
Size of Dimm #1: Non-Presence
<- Select Screen
↑↓ Select Item
Enter Go to Sub Screen
F1 General Help
F10 Save and Exit
ESC Exit
Memory CLK :400 MHz, N/A
CAS Latency(Tcl) : 6 CLK , N/A
RAS/CAS dELAY(Trcd) : 6 CLK , N/A
Row Precahrge Time (Trp) : 6 CLK , N/A
Min Active RAS (Tras) : 15 CLK , N/A
RAS/RAS Delay (Trrd) : 4 CLK , N/A
Row Cycle (Trc) : 21 CLK , N/A
Read to Precharge (Trtp) : 4 CLK , N/A
Write Recover Time (Twr) : 6 CLK , N/A
HT Link Width Control [Enable]
GfxNBPstateDis Support [Enable]
T0Time Override [Disabled]