Software setup, Make a recovery sd card (for advanced user only) – IBASE IB102 User Manual
Page 26
Copyright © 2014 IBASE Technology Inc. All Rights Reserved.
26
IB102
4. Software Setup
Basically, the IB102 is preloaded O.S (Android / Linux) into eMMC by default. Connect
the 8” LVDS panel (optional) with IB102, and 12V/ POE+ power directly.
4.1. Make a Recovery SD Card (for advanced user only)
For advanced user who has Ibase standard image file, refer to this chapter to prepare
the recovery boot-up SD card. Ibase optionally provides 8” LVDS panel for users to
prepare the software application pre-development easily under Linux / Android
platform.
Preparing the Recovery SD card to install the Linux/ Android image into eMMC
Note: all data in the eMMC will be erased.
-- for IB102
Please download the
Recovery SD card’s image by FTP in advance.
Host: 219.87.145.180 port: 21
User: bsp
Password: (please check with your sales)
Image path: (image path may change / update)
/bsp/RISC_IMAGE/IB102/IB102/Linux/IB102-Linux_3.0.35-v1.1.rar
/bsp/RISC_IMAGE/IB102/IB102/Android/IB102-Android_4.3-v1.1.rar
(based on Freescale BSP: L3.3.35.4.1.0)