IBASE IB102 - Manual (Page 3)

3
IBASE Technology Inc.
Quick Start Guide
Here is a step-by-step guide to boot up the IB102:
a. Based on request, the (Android) or (Linux OS) will be preloaded in the IB102’s eMMC,
or IB102A’s SD card. Please proceed to do the following:
 Check the backlight power’s voltage and connect the 8” LVDS panel (optional)
with the LVDS cable (optional, please contact Ibase sales dept.).
 Connect the device with (12V/ POE/or corresponding) power input directly.
b. To make a recovery SD card (for IB102 advanced user only), or to make an SD card
for IB102A, please refer to Chapter 4.
c. To use the root/ serial port debug function, please check Chapter 4.2.1 (COM1
debug cable setup) information.
d. To boot up with a different LVDS panel, please refer to Chapter 4.2.2.
Note: different LVDS panels have different customization; please check with your sales contact.
e. For advanced users who are building their own products, please refer to Chapter 5.
f. For special HW/SW/ panel customization requests or assistance, please check with
Ibase sales dept.