Booting with your sd card – IBASE IB102 User Manual
Page 46
46
IB102
5.1.7. Booting with your SD card
(For advance software users only)
Put SD card in your board and insert special COM port dongle to boot from SD. Connect a debug cable
to debug port with serial port 115200/N/8/1 setting on your PC’s serial port program such
hyperterminal/teraterm. Connect LVDS panel. Power on and you will see u-boot prompt.
At u-boot prompt, press Enter before time out. Type the following setting to boot from SD card + LVDS
panel:
setenv bootcmd_mmc 'run bootargs_base bootargs_mmc; mmc dev 1; mmc read ${loadaddr} 0x800
0x2000; bootm'
setenv bootargs_mmc 'setenv bootargs ${bootargs} root=/dev/mmcblk1p1 rootwait rw
video=mxcfb0:dev=ldb,IB102-XGA,if=RGB666 ldb=sep0 video=mxcfb1:off video=mxcfb2:off
fbmem=15M rootfstype=ext4'
saveenv
After that, prepare your LCD, power off and power on again.
You can see Ubuntu Linux is running on monitor.