IBASE IB102 - Manual (Page 28)

28
IB102
--- Run Recovery Program---
7. Insert the SD card/Micro-SD into the motherboard. Make sure the 8” panel
(or your own panel) is connected and connect the power supply to boot up
the system.
8. Recovery program on your SD card will execute automatically. The eMMC on
PCB will be formatted and the OS will be installed while the progress bar on
the screen shows 100% complete. ( it takes 5~8 minutes around)
9. Remove the power and the recovery SD. Remember to remove the special
RJ45 dongle also.
10. Connect the power and boot up the IB102, you will see the Linux/ Android
boot up pages.
Note for IB102A:
IB102A, by default, is set to boot up from SD card only. Just insert/ prepare your SD
card, and connect the power. To create IB102A SD card images, please download the
boot
SD card’s image by FTP in advance.
/bsp/RISC_IMAGE/IB102/IB102A/Linux_sd/ IB102A_Linux_3.0.35_1.1.rar
/bsp/RISC_IMAGE/IB102/IB102A/Android_sd/IB102A_Andoird_4.3_1.1.rar