IDK MSD-804FD User Manual
Page 107
MSD-804FD Users Guide (Command Guide)
107
@STF
Set flash time (Command keys and DISPLAY POWER keys)
Command
format
@STF, switch_1, flash_1 (, switch_2, flash_2･･･)
Return value
format
@STF, switch_1, flash_1 (, switch_2, flash_2･･･)
Parameter
switch_1-9
: key type
0 = All keys, 1 to 5 = COMMAND A to E,
6 to 9 = DISPLAY1 POWER to DISPLAY4 POWER
flash_1-9
: Flash time
-1 = Flash during command execution, 0 = Not flash,
1 to 1000 = Flash for the specified time (range: 1 to 1000 seconds)
[Default]: If COMMANDs A to I: 0 (Not flash),
If DISPLAYn POWER: -1 (Flash during command execution)
Example
Send
Receive
@STF,4,5
@STF,4,5
COMMAND D flashes for 5 seconds after command
execution starts.
Terminated normally.
Related info.
8.12.8 Flash time (Command keys and DISPLAY POWER keys)
@GTF
Get flash time (Command keys and DISPLAY POWER keys)
Command
format
@GTF, switch_1 (, switch_2･･･)
Return value
format
@GTF, switch_1, flash_1 (, switch_2, flash_2･･･)
Parameter
switch_1-9
: key type
0 = All keys, 1 to 5 = COMMAND A to E,
6 to 9 = DISPLAY1 POWER to DISPLAY4 POWER
flash_1-9
: Flash time
-1 = Flash during command execution, 0 = Not flash,
1 to 1000 = Flash for the specified time (range: 1 to 1000 seconds)
[Default]: If COMMANDs A to I: 0 (Not flash),
If DISPLAYn POWER: -1 (Flash during command execution)
Example
Send
Receive
@GTF,9
@GTF,9,-1
Get flash time of DISPLAY4 POWER.
Flashes during command execution.
Related info.
8.12.8 Flash time (Command keys and DISPLAY POWER keys)