IDK MSD-804FD - Manual (Page 80)

MSD-804FD Users Guide (Command Guide)
80
@GBI Get OUTB IP address
Command
format @GBI
Return value
format @GBI, unit_1, unit_2, unit_3, unit_4
Parameter unit_1 : Upper bit of the IP address to unit_4 : Lower bit of the IP address
0 to 255 = 8 bit (Decimal notation) [Default] 192.168.001.200
Values can be got only if Cat5e/Cat6 output option is installed.
Example Send
Receive
@GBI
@GBI,192,168,3,2
Get IP address of OUTB.
IP address is “192.168.3.2”.
Related info. 8.11.1 IP address
@SSB Set subnet mask
Command
format @SSB, unit_1, unit_2, unit_3, unit_4
Return value
format @SSB, unit_1, unit_2, unit_3, unit_4
Parameter unit_1 : Upper bit of the subnet mask to unit_4 : Lower bit of the subnet mask
0 to 255 = 8 bit (Decimal notation) [Default]: 255.255.255.000
Example Send
Receive
@SSB,255,255,192,0
@SSB,255,255,192,0 Set subnet mask to 255.255.192.0 (=18 bit).
Terminated normally.
Send
Receive
@SSB,255,0,0,128
@ERR,1
If you specify an invalid value for the subnet
mask, an error is replied.
Related info. 8.11.2 Subnet mask
Note After IP address or serial communication setting is changed, communication may be
disabled. Change environmental settings based on the settings of the MSD.