ikan IKW1-A - Manual (Page 15)

15
VI. SPECIFICATIONS
Transmitter
Input
1 x BNC 3G/HD/SD-SDI, 2.97G/1.485G/270M
1 x HDMI HDMI (with HDCP v.1.1), 19pin Female
Audio Input 1 x Audio Jack In 3.5mm TRS, Line Level Input
Output 1 x BNC SDI Active Loop Output
Video
Formats
HD : 1920x1080 (60p, 59.94p, 50p)
1920x1080 (60i, 59.94i, 50i, 30p, 29.97p, 25p, 24p, 23.98p)
1920x1080 (30psf, 29.97psf, 25psf)
1280x720 (60p, 59.94p, 50p)
SD : NTSC, PAL
Radio
Frequency U-NII-1 (5.15~5.25 GHz), U-NII-3 (5.725~5.85 GHz)
Transmission Power 20mW (13.5dBm)
Transmission
Distance
500 ft (150m) (included antenna), 1500ft (500m)
(directional antenna)
Latency 20ms
Encoding/Decoding H.264 Base Profile @4.2
2 x Antenna
SMA Female
Security
802.11i compatible signal protection by 128 bit AES
encryption
General
1 x GPIO GPI-7 Port, RJ-45P Jack
2 x mini USB Firmware Update (MAIN, MICOM)
4 x LED Power, Link, Video, Tally
3 x Switch
Pairing, Input Selection, Power
Battery
V-Mount, DV-Mount, Anton Bauer Mount
Power
Requirements
DC (7V~30V) With AC Adapter(100 ~ 230V, 50Hz/60Hz)
Power Consumption 10W
Operating
Temperature
32°F ~104°F (0°C - 40°C)
Operating Humidity 20% ~ 80% RH
Included
Accessories
• AC Power Cable • 2 Antennas • DC Adapter
Optional Accessory
• Carrying Case • 20dBi Directional Antenna
• DV Battery Mount • Anton Bauer Mount