Dynex DX-LDVD22-10A - Manual (Page 13)

Making connections
9
For a better picture, you can connect an S-Video cable to the
S-VIDEO Out jack on the VCR and to the S-VIDEO IN jack on your
TV.
4 Connect an audio cable to the AV AUDIO OUT jacks on the VCR.
5 Connect the other end of the cable to the AUDIO IN L and R jacks
on the back of your TV.
To play from the VCR (option 2):
1 Turn on your TV, then press INPUT to select Composite or
S-Video input mode.
2 Turn on the VCR, insert a videotape, then press PLAY on the VCR.
Connecting a camcorder or game
Tip: Some game consoles have an HDMI connector, which can be used for
a better picture.
To connect a camcorder or game:
1 Make sure that your TV’s power cord is unplugged and the
camcorder or game is turned off.
2 Connect an AV cable to the AV OUT VIDEO, AUDIO-L, and
AUDIO-R jacks on the camcorder or game.
3 Connect the other end of the cable to the VIDEO IN, AUDIO-L,
and AUDIO-R jacks on the back of your TV.
To play from a camcorder or game:
1 Turn on your TV, then press INPUT to select Composite mode.
2 Turn on the camcorder or game, and set it to the correct output
mode. See the camcorder’s or game’s user guides for more
information.
Connecting an HDMI device
To connect an HDMI device:
1 Make sure that your TV’s power cord is unplugged and the HDMI
device is turned off.
2 Connect an HDMI cable to the HDMI OUT jack on the HDMI
device.
3 Connect the other end of the cable to the HDMI jack on the back
of your TV.
To play from the HDMI device:
1 Turn on your TV, then press INPUT select HDMI.
2 Turn on the HDMI device, and set it to the correct output mode.
See the HDMI device’s user guide for more information.
Note: If the external device has DVI output only, use a DVI-to-HDMI
adapter to connect to the HDMI jack, then connect an audio cable to
the PC AUDIO IN jack.
Connecting a component video device
To connect a component video device:
1 Make sure that your TV’s power cord is unplugged and the
component video device is turned off.
2 Connect a component video cable to the COMPONENT OUT jacks
on the component video device.
3 Connect the other end of the component video cable to the
COMPONENT IN jacks on the back of your TV.
4 Connect an audio cable to the AUDIO OUT jacks (L/R) on the
component device.
5 Connect the other end of the audio cable to the
COMPONENT AUDIO-R and AUDIO-L jacks on the back of
your TV.
To play from a component device:
1 Turn on your TV, then press INPUT to select Component.
2 Turn on the component video device and set it to the correct
output mode. See the component video device’s user guide for
more information.
Connecting a computer
Tip: Some computers have an HDMI connector, which can be used for a
better picture.
To connect a computer:
1 Make sure that your TV’s power cord is unplugged and the
computer is turned off.
2 Connect a VGA cable (not provided) to the VGA jack on the
computer, then connect the other end of the cable to the VGA IN
jack on the back of your TV.
Note: The VGA cable should be a 15-pin D-Sub (analog RGB) cable.
A U D IO
IN
R
L
V IDE
O
IN
S-
VID
EO
IN
Camcorder or game
Back of TV
AV cable
Note: Cables are often
color-coded to connectors
Connect yellow to yellow,
red to red, and white to
white.
HD
MI
HDMI
Back of TV
HDMI cable
Device with HDMI output
COMPONENT
IN
Y
Pb
Pr
S-
VID
E O
IN
AU
DI
OI
N
L
R
Back of TV
Co
m
p
o
n
en
t vi
deo
c
a b
les
Aud
io
c
a bl
e s
Component video device
Note: Cables are
often color-coded
to connectors.
PC
AU
DIO
IN
VGA
IN
Audio cable (stereo mini plugs)
D-Sub cable (analog RGB)
Back of TV
Computer
DX-LDVD22-10A_09-0042.book Page 9 Monday, March 9, 2009 1:17 PM