Dynex DX-LDVD22-10A - Manual (Page 14)

10
Turning on your TV for the first time
3 Connect an audio cable to the AUDIO OUT jack on the computer,
then connect the other end of the cable to the PC AUDIO IN jack
on the back of your TV.
Note: The audio cable should have a stereo mini plug.
To play video from a computer:
1 Turn on your TV, then press INPUT to select VGA.
2 Turn on the computer, then check the image on your TV. There
may be noise associated with the resolution, vertical pattern,
contrast, or brightness in VGA mode. If noise is present, change
the PC mode to another resolution, change the refresh rate to
another rate, or adjust the brightness and contrast on the menu
until the picture is clear. If the refresh rate of the PC graphic card
can not be changed, change the PC graphic card or consult the
manufacturer of the PC graphic card.
Note: All above listed are subject to VESA criteria.
Turning on your TV for the first
time
To turn on and configure your TV:
1 Make sure that you have inserted the batteries in the remote
control, connected the antenna to the TV, and connected the AC
power.
2 Press POWER , then wait several seconds. The power indicator
LED turns blue and the TV turns on.
3 Select the signal source for your TV.
• Press INPUT to open the signal source menu, then press
CH+ or CH- to select the source. Options include:
• TV
• Composite
• S-Video
• Component
• DVD
• VGA
• HDMI
• Press ENTER/VOL+ to confirm.
4 Select the TV signal source for your TV and auto scan for
channels.
• Press MENU, then press VOL+/VOL- to highlight
CHANNELS.
• Press ENTER/VOL+. The Channels menu opens.
• Press CH+/CH- to highlight Auto Channels Search, then
press ENTER/VOL+ The Auto Channels Search sub-menu
opens.
• Press CH+/CH- to select Antenna or Cable, then press
ENTER. A checkmark appears in the circle next to your
choice.
• Press CH+/CH- to highlight START, then press
ENTER/VOL+. The TV automatically scans and memorizes
all the active, available channels in your area.
5 Set the volume of your TV by pressing VOL+ or VOL-.
6 Set the menu language of your TV.
• Press MENU, then press VOL+/VOL- to highlight SETTINGS.
• Press ENTER/CH-. The Settings menu opens.
• Press CH+/CH- to highlight Menu Settings, then press
ENTER/VOL+. The Menu Settings menu opens.
7 Press CH- to highlight Language, then press ENTER/VOL+ to
open the menu.
8 Press CH+/CH- to select the language you want. Options include:
• English
• French
• Spanish
9 Select the channel you want by pressing CH+/CH- to go to the
next or previous channel, or directly by pressing the number
buttons.
Mode Resolution
Line freq
(KHz) Frame freq
(Hz)
VGA 640x480 31.5 60
SVGA 800x600 37.9 60
XGA 1024x768 48.4 60
1280x720 45 60
1280x768 47.45 60
1360x768 47.7 60
MOVE SELECT PREVIOUS EXIT ENTER MENU EXIT
PICTURE
Channels
AUDIO CHANNELS SETTINGS
Off
Auto Channels Search
Add/Skip Channels
Audio Only
Favorites
Channel Labels
Channel Strength
VOL -
CH+
CH-
VOL +
Choose your TV source
Antenna
Cable 0 Analog Channels
0 Digital Channels
Start
MOVE SELECT PREVIOUS EXIT ENTER VOL -
CH+
CH-
VOL + MENU EXIT
PICTURE
Channels Auto Channels Search
AUDIO CHANNELS SETTINGS
MOVE SELECT ENTER
Settings
Parental Controls
Closed Caption
Computer Settings
Time
Menu Settings
Input Labels
PREVIOUS EXIT MENU EXIT
PICTURE AUDIO CHANNELS SETTINGS
VOL -
CH+
CH-
VOL +
Transparency 0 10
Language English
MOVE SELECT ENTER
Settings Menu Settings
PREVIOUS EXIT MENU EXIT
PICTURE AUDIO CHANNELS SETTINGS
VOL -
CH+
CH-
VOL +
DX-LDVD22-10A_09-0042.book Page 10 Monday, March 9, 2009 1:17 PM