Dynex DX-LDVD22-10A - Manual (Page 20)

16
Changing channel settings
Checking the DTV signal strength
You can check the DTV signal strength to determine if you need to
adjust your antenna or digital cable input. The higher the signal
strength, the less likely you are to experience picture degradation.
To check the DTV signal strength:
1 Press MENU. The on-screen menu opens.
2 Press VOL+ or VOL– to highlight CHANNELS, then press
ENTER/CH–. The CHANNELS menu opens.
3 Press CH+ or CH– to highlight Channel Strength, then press
ENTER/VOL+. The Channel Strength screen opens displaying the
signal strength of the channel.
4 Press EXIT to close the menu.
Listening to audio only
To listen to audio only:
1 Press MENU. The on-screen menu opens.
2 Press VOL+ or VOL– to highlight CHANNELS, then press
ENTER/CH–. The CHANNELS menu opens.
3 Press CH+ or CH– to highlight Audio Only, press ENTER/VOL+
to open sub-menu, then press CH+/- to select On.
4 Press EXIT to close the menu.
Notes:
If Audio Only is set to On, the backlight should automatically turn off 5
seconds after last remote command. If the backlight is off, pressing
POWER on the remote control will turn off the TV. Pushing any other
button turns on the backlight and the button’s function is ignored.
audio only is still set to on, the backlight will automatically turn off 5s
after last remote command. When a channel is not Audio Only and the
backlight is turned off, pressing any button other than Power on the
remote control turns on the backlight and Audio Only is automatically
set to Off.
The Audio Only setting of a channel is not remembered. When you change
to another channel, change input, or if you cycle the power, it will be
set to Off.
Turning on Auto Zoom
Auto Zoom automatically adjusts the aspect ratio of the picture, based
on TV size and TV program.
To turn on Auto Zoom:
1 Press MENU. The on-screen menu opens.
2 Press VOL+ or VOL– to highlight CHANNELS, then press
ENTER/CH–. The CHANNELS menu opens.
3 Press CH+ or CH– to highlight Auto Zoom, press ENTER/VOL+
to open sub-menu, then press CH+/- to select On.
4 Press EXIT to close the menu.
EXIT EXIT
Custom
40
60
45
R5
+5
CHANNELS SETTINGS
MOVE SELECT PREVIOUS ENTER MENU
PICTURE
Picture
AUDIO
Mode
Brightness
Sharpness
Contrast
Color
Tint
VOL -
CH+
CH-
VOL +
MOVE SELECT PREVIOUS EXIT ENTER MENU EXIT
PICTURE
Channels
AUDIO CHANNELS SETTINGS
Off
Auto Channels Search
Add/Skip Channels
Audio Only
Favorites
Channel Labels
Channel Strength
VOL -
CH+
CH-
VOL +
EXIT EXIT
Custom
40
60
45
R5
+5
CHANNELS SETTINGS
MOVE SELECT PREVIOUS ENTER MENU
PICTURE
Picture
AUDIO
Mode
Brightness
Sharpness
Contrast
Color
Tint
VOL -
CH+
CH-
VOL +
MOVE SELECT PREVIOUS EXIT ENTER MENU EXIT
PICTURE
Channels
AUDIO CHANNELS SETTINGS
Off
Auto Channels Search
Add/Skip Channels
Audio Only
Favorites
Channel Labels
Channel Strength
VOL -
CH+
CH-
VOL +
EXIT EXIT
Custom
40
60
45
R5
+5
CHANNELS SETTINGS
MOVE SELECT PREVIOUS ENTER MENU
PICTURE
Picture
AUDIO
Mode
Brightness
Sharpness
Contrast
Color
Tint
VOL -
CH+
CH-
VOL +
MOVE SELECT PREVIOUS EXIT ENTER MENU EXIT
PICTURE
Channels
AUDIO CHANNELS SETTINGS
Off
Auto Channels Search
Add/Skip Channels
Audio Only
Favorites
Channel Labels
Channel Strength
VOL -
CH+
CH-
VOL +
DX-LDVD22-10A_09-0042.book Page 16 Monday, March 9, 2009 1:17 PM