Datalogic Scanning DS4600A - Manual (Page 10)

POWER SUPPLY
- This product is intended to be installed by Qualified Personnel only.
- Model DS4600A-XXX0:
This device is intended to be supplied by a UL Listed Direct Plug-in Power
Unit marked "Class 2", rated 10-30 V, minimum 0.60 A.
This device may also be supplied by a UL Listed Power Unit with a "Class 2" or
LPS power source which supplies power directly to the scanner via the 25-pin
connector.
- Model DS4600A-2XX5:
This device is intended to be supplied by a UL Listed Direct Plug-in Power
Unit marked "Class 2", rated 24 V, minimum 0.50 A.
This device may also be supplied by a UL Listed Power Unit with a "Class 2" or
LPS power source which supplies power directly to the scanner via the 25-pin
connector.
See par. 2.3.1 for correct power supply connections.
WEEE COMPLIANCE
viii