Ivoclar Vivadent IPS PressVEST Speed v.1 - Manual (Page 5)

Mixing ratio:
The percentages are approximate and can be adjusted if necessary. Do not dilute concentrate to less
than 40 %.
Vacuum mixing time – 2.5 minutes (approx. 350 rpm at room temperature)
– If you use a ‘High-Speed’ mixing device, shorten the vacuum mixing time accordingly.
Investing – Slightly vibrate the ring on a dental vibrator while pouring the material into the ring. Avoid vigorous
shaking.
Working time – Approx. 6–7 minutes (mixed at room temperature and 350 rpm)
Setting time – 30 minutes (min. 30 to max. 45 minutes)
– Do not disturb the ring during the setting stage
IPS e.max Press
Indication Concen- 100 g ring 200 g ring
tration Liquid : distilled H
2
O Liquid : distilled H
2
O
Single crowns, veneers, 60% 16 ml : 11 ml 32 ml : 22 ml
partial crowns
3-unit bridges 50% 27 ml : 27 ml
Press on Galvano 60% 16 ml : 11 ml 32 ml : 22 ml
IPS Empress 2
Indication Concen- 100 g Muffel 200 g Muffel
tration Liquid : distilled H
2
O Liquid : distilled H
2
O
Single crowns 60% 16 ml : 11 ml 32 ml : 22 ml
3-unit bridges 50% 27 ml : 27 ml
IPS Empress Cosmo
Indication Konzen- 100 g ring 200 g ring
tration Liquid : distilled H
2
O Liquid : distilled H
2
O
Preprosthetic build-up in 40– 11 ml : 16 ml 22 ml : 32 ml
combination with 50% 13.5 ml : 13.5 ml 27 ml : 27 ml
CosmoPost
IPS e.max ZirPress
Indication Concen- 100 g ring 200 g ring
tration Liquid : distilled H
2
O Liquid : distilled H
2
O
Press on ZrO
2
60% 16 ml : 11 ml 32 ml : 22 ml
single crowns
Press on ZrO
2
50% 27 ml : 27 ml
bridges
Press on ZrO
2
50% 27 ml : 27 ml
inlay-bridges
IPS InLine PoM – Press-on-Metal ceramic
Indication Concen- 100 g ring 200 g ring
tration Liquid : distilled H
2
O Liquid : distilled H
2
O
Pressing restorations on
opaquerized metal
60% 16 ml : 11 ml 32 ml : 22 ml
frameworks