James Loudspeaker SPL SERIES LCR (1 piece bracket) - Manual

Page 1
SPL SERIES LCR INSTALLATION GUIDE
(1 piece bracket)
Step 1 Unpack the carton. You should have 1
plasma/LCD/LED speaker bar, 2 brackets, 8 Allen
screws and 4 aluminum holding tabs.
NOTE The screws will require a 3/32
Step 2 Lay your TV face down on a pad or other
protected surface.
Step 3 Lay the speaker face down along the
bottom of the TV. The bar should be the same
length as the TV, so center the bar under the TV.
Step 4 Lay the 2 brackets down on the rear,
lining up the slot in each bracket with the TV wall
mount bracket holes on the rear of the TV.