JLCooper PPS-2 Remote for Mac OS X - Manual (Page 15)

Batch Striping
If Use Batch Striping is checked, then striping will be controlled by the Batch Striping
List. Hitting the Play button will start striping from the first item (or first selected item,
depending on settings) in the list. Hitting either Stop or Pause will terminate striping and
reset the time and item counters. So after stopping or pausing, pressing Play again will
start over from the beginning.
There are a couple of settings that affect how the Batch Stripe List is used. Stripe All
causes striping to start with the first entry in the list, and continue sequentially, striping
each item until the end of the list is reached. If at least one entry in the Batch Striping
list is selected, then the Stripe Selected choice becomes available. In this case, only
the selected items in the list will be striped.
While batch striping is in progress the title of the entry currently being striped is
displayed at the top of the window.
! PPS-2 Remote for Mac OS X™
! 13