Q-See QSTD5304 User Manual

Page 15

Advertising
background image

QSTD5304 Digital Video Recorder User Manual

15

3.2.3 Record Configuration

Record Configuration menu is shown in Fig. 3.7.



1. VIDEO RESOLUTION

This unit supports CIF format.

Resolutions of different video formats are: PAL: 352*288(CIF);

NTSC: 352*240(CIF)

2. RECYCLE

Checking the "

RECYCLE" option means once the hard drive is filled the DVR

will continue to record by covering the previous recording automatically,
starting with the oldest. If you do not check "

RECYCLE", recording will stop

once the hard drive is full.

3. PRERECORD TIME

Prerecord time refers to the amount of time recorded from memory before the
alarm was triggered. There are two options: 5 seconds and 10 seconds.

4. TIME STAMP
If selected, record time will be displayed on the bottom of the screen at
playback

5. CHANNEL

STEP1

Move the cursor to the item.

STEP2

Press "

Enter" key to switch the channel and select.

6. VIDEO QUALITY

There are five options: lowest, lower, medium, higher and highest. The higher
the picture quality, the clearer the image is, but more hard drive space will be
taken up.

7. AUDIO

If you check "

AUDIO", DVR will record audio with video recording. Otherwise,

it will not record audio.

Notice:

The default setting is that Audio input1 matches channel1 and Audio input2

matches channel2.

When playing back the record, please press "AUDIO" button to switch the sound

to the corresponding channel.

Fig3.7 Record Configuration

Advertising