Q-See QSTD5304 - Manual (Page 28)

QSTD5304 Digital Video Recorder User Manual
28
Steps are described below:
STEP1 Make sure the firmware update is on the USB flash drive.
STEP2 Enter the menu after word-‘USB’ is displayed on the live mode.
STEP3 Move the cursor to " UPDATE" button.
STEP4 Press " Enter" key to start updating.
STEP5 After the program is upgraded, the system will restart.
LOAD DEFAULT
Fig 3.33 Load Default
Load Default menu is shown as Fig. 3.33. Click YES, and it will recover the
default setting installed at the factory.
IMPORT CONFIGURATION & EXPORT CONFIGURATION
This function is used to help users manage multiple DVRs conveniently.
When users need to set up the same parameters in more than one DVR, they
can copy one DVR’s setting to all others without setting them up one by one.
EXPORT CONFIGURATION can copy one DVR’s parameter settings to a
USB flash drive; and then use
IMPORT CONFIGURATION to input the
settings copied onto the USB flash drive from the first DVR to another DVR.
CLEAR ALARM OUT
This item is to clear the current alarm out, please refer to Fig. 3.34.
Fig 3.34 Clear Alarm Out